DEK Adjustable Squeegee Holders (DABH) -

   

For DEK model 260, 265, 288, Infinity, and Horizon printers. JNJ’s DABH Adjustable squeegee holders feature a rugged gold (standard) or green (lead free) anodized aluminum housing, complete with mounting studs and knobs, quick change metal blade design, and adjustable solder paste deflectors.  Available in 3 sizes, 12, 18., and 24" lengths, with each of the 3 basic sizes being able to accommodate a 6" range of metal blades. For example, the DABH-12 can accommodate metal blades ranging from 6" to 12" in 2" increments, the 18" can accommodate blades ranging from 12" to 18", and the 24" can accommodate blades from 18" to 24". The paste deflectors can quickly be adjusted to the various size blades by loosening a single thumb screw, sliding it into position, and then tightening the thumbscrew. The squeegee holder utilizes a center registration/locating pin to center any length blade in the holder, allowing operators to loosen the clamp screws, slide an old blade out and slide a new blade in of equal or different lengths, and then tighten the screws. Changing blades or blade lengths only takes a couple of minutes. 

The squeegee holder is made  up of 2 main pieces, a "base" which is the lower part of the squeegee holder assembly, and a "printer adapter" which is the top half of the assembly. The base of the adjustable squeegee holders is common for all JNJ adjustable squeegee holders, which are available for a variety of printer models.  The printer adapters can be charged out quickly with 2 socket cap head screws that connect it to the base. Alignment pins pressed into the "base" guarantee the top adapters are properly aligned. If you have printers from 2 different manufacturers, you can swap printer adapters to move the squeegee from one printer to the next. If you only have printers from one manufacturer, then there is no need for additional adapters, or for taking them off the .  

They are sold in sets of two, and they have a 60º angle.

** For our special holders and blades intended for Lead Free Lines, add "-LF" to end of the part number when ordering 

DEK Squeegee Holders - No Blades or Deflectors

Printer

Part#

Description

Qty

Unit

 DEK

DABH-12

12" Adjustable Squeegee Holder, 60º Angle

2

Set

DEK

DABH-18

18" Adjustable Squeegee Holder, 60º Angle

2

Set

DEK

DABH-24

24" Adjustable Squeegee Holder, 60º Angle

2

Set

DEK

DSPD-2

DEK Solder Paste Deflectors, Set of 4

4

Set



DEK ADJUSTABLE Squeegees, Complete Assemblies - Holders, Blades, & Deflectors

Printer

Part#

Description

Qty

Unit

DEK

DABHA-12-6

12" Adjustable Holder, with 6" Blade & Deflector Assembly, 60º

2

Set

DEK

DABHA-12-8

12" Adjustable Holder, with 8" Blade & Deflector Assembly, 60º

2

Set

DEK

DABHA-12-10

12" Adjustable Holder, with 10" Blade & Deflector Assembly, 60º

2

Set

DEK

DABHA-12-12

12" Adjustable Holder, with 12" Blade & Deflector Assembly, 60º

2

Set

DEK

DABHA-18-12

18" Adjustable Holder, with 12" Blade & Deflector Assembly, 60º

2

Set

DEK

DABHA-18-14

18" Adjustable Holder, with 14" Blade & Deflector Assembly, 60º

2

Set

DEK

DABHA-18-16

18" Adjustable Holder, with 16" Blade & Deflector Assembly, 60º

2

Set

DEK

DABHA-18-18

18" Adjustable Holder, with 18" Blade & Deflector Assembly, 60º

2

Set

DEK

DABHA-24-18

24" Adjustable Holder, with 18" Blade & Deflector Assembly, 60º

2

Set

DEK

DABHA-24-20

24" Adjustable Holder, with 20" Blade & Deflector Assembly, 60º

2

Set

DEK

DABHA-24-22

24" Adjustable Holder, with 22" Blade & Deflector Assembly, 60º

2

Set

DEK

DABHA-24-24

24" Adjustable Holder, with 24" Blade & Deflector Assembly, 60º

2

Set

DEK

DA-ADPT

 DEK Adjustable Squeegee Adapter

2

Set

  

Metal Blade Inserts for DEK Adjustable squeegee Holders

Part #

Description

Overhang Distance

AD-FMI-6

6" Metal  Blade for DABHA

15mm overhang

AD-FMI-8

8" Metal  Blade for DABHA

15mm overhang

AD-FMI-10

10" Metal  Blade for DABHA

15mm overhang

AD-FMI-12

12" Metal  Blade for DABHA

15mm overhang

AD-FMI-14

14" Metal  Blade for DABHA

15mm overhang

AD-FMI-16

16" Metal  Blade for DABHA

15mm overhang

AD-FMI-18

18" Metal  Blade for DABHA

15mm overhang

AD-FMI-20

20" Metal  Blade for DABHA

15mm overhang

AD-FMI-22

22" Metal  Blade for DABHA 

15mm overhang 

 AD-FMI-24 

24" Metal  Blade for DABHA 

 15mm overhang

 ** For our special holders and blades intended for Lead Free Lines, add "-LF" to the part number when ordering